Switching Standard DC Power Supply Apd1000 Series
parameters
• Input voltage range 1Ø 110V/220V 3Ø 220V 220/380V
• CV (constant voltage) mode: line regulation≦±0.02% ±6Count load regulation≦≤± 0.05% of full scale Ripple&Noise≦0.1%RMS
• CC (constant current) mode: line regulation≦±0.05% ±3Count load regulation≦≤± 0.15% of full scale Ripple&Noise≦0.3%RMS
• CP (constant power) mode: line regulation≦±0.05% ±6Count load regulation≦≤± 1% of full scale
overvoltage setting range 0% ~ 110% of rated voltage; Overcurrent 0% ~ 110% of rated current
CV transient response time 10ms(at Resistance load 10% ~ 90%)
• output climb rate up:10 to 100% <30ms down: <150ms
High performance characteristics
• High power density, small size, high efficiency, stable performance
It has three working modes of constant voltage, constant current and constant power, and can be converted automatically.
• The power part of the power supply is composed of IGBT fast switch, high frequency transformer and fast semiconductor
• Control part of the use of 32-bit high-speed microcontroller and large-scale FPGA circuit, fast response
• Rich interface configuration, isolated RS232,RS485 and other interfaces and perfect command system, a variety of baud rate or address selection.
• With internal resistance simulation function (optional), with power (True Watt) measurement function
• The set data memory, automatic memory shutdown before the working state.
• Provide output voltage ramp up (Ramp up), slow down (Ramp down) function.
A single test group can perform 35 test points (different voltage 0~800V, current 0 ~ 1000A, time 0.1S ~ 999.9H setting), and can continuously do cyclic (999999 times) tests
• Full digital design, 14Bit A/D and D/A setting and reading resolution.
• Remote voltage compensation up to 5V, the output is completely isolated from the mains
• Real-time acquisition of power semiconductor temperature, intelligent heat dissipation design
• Programable over-voltage, over-current, over-power protection, power semiconductor over-temperature protection, reverse protection.
• LED/LCD display parameters: voltage, current, power and time
Selection specifications (APD1000 series)
| 0 to 30A | 0 to 50A | 0 ~ 100A | 0 ~ 200A | 0 ~ 400A | 0 ~ 600A | 0-1000A | |
|---|---|---|---|---|---|---|---|
| 0~30V | 1030-30A | 1030-50A | 1030-100A | 1030-200A | 1030-400A | 1030-600A | 1030-1000A |
| 0 to 40V | 1040-30A | 1040-50A | 1040-100A | 1040-200A | 1040-400A | 1040-600A | 1040-1000A |
| 0 to 60V | 1060-30A | 1060-50A | 1060-100A | 1060-200A | 1060-400A | 1060-600A | 1060-1000A |
| 0 to 80V | 1080-30A | 1080-50A | 1080-100A | 1080-200A | 1080-400A | 1080-600A | 1080-1000A |
| 0~100V | 1100-30A | 1100-50A | 1100-100A | 1100-200A | 1100-400A | 1100-600A | 1100-1000A |
| 0 to 120V | 1120-30A | 1120-50A | 1120-100A | 1120-200A | 1120-400A | 1120-600A | 1120-1000A |
| 0~160V | 1160-30A | 1160-50A | 1160-100A | 1160-200A | 1160-400A | 1160-600A | 1160-1000A |
| 0~240V | 1240-30A | 1240-50A | 1240-100A | 1240-200A | 1240-400A | 1240-600A | 1240-1000A |
| 0~330V | 1330-30A | 1330-50A | 1330-100A | 1330-200A | 1330-400A | 1330-600A | 1330-1000A |
| 0~600V | 1600-30A | 1600-50A | 1600-100A | 1600-200A | 1600-400A | 1600-600A | 1600-1000A |
| 0~1000V | 11000-30A | 11000-50A | 11000-100A | 11000-200A | 11000-400A | 11000-600A | 11000-1000A |
Note: 1. Power calculation method: voltage A× current I = power W 2. customized minimum power of this power supply is 500W
Other specifications are welcome to customize
