Momentum S Series Is a Single Output Programmable DC Power Supply, single-Phase Or Three-Phase Input Modes Are Available to Support Universal Input Voltage. Adopting High Power Density Structure Design, 10kW Output Power Is Realized in 2U Volume, Which Can Meet Higher Power Demand through Optical Fiber Parallel Machine. At the Same Time, a Wide Range of Output Design Is Adopted, Which Expands the Output Range of Current and Voltage at Full Power Output and Is More Flexible to Use. The High-End Appearance Is Matched with a Simple UI Touch Interface, and the Software Has Built-in Unique Testing Functions to Meet Testing Applications Such as System Integration Testing, Battery Charging and Simulation, Automotive Electronic Testing, and Solar Energy Panel Simulation.
Momentum S Series Wide Range Programmable DC Power Supply
parameters
Product Features
full-touch flip panel design, simple UI interaction interface, easier and faster operation
support universal input voltage, single/three-phase input optional
high power density structure design, 2U/10kW
wide range output design, full power provides wider voltage and current combination
optical fiber parallel communication, strong anti-interference, high transmission speed, constant performance (optional)
voltage/current rise/fall slope adjustable
edit output sequence in List/Step mode
supports automatic switching of constant voltage (CV), constant current (CC), and constant power (CP). The priority of CC and CV is optional.
DDS arbitrary function function *
photovoltaic array simulation function *
analog charger for three-stage charging *
battery simulation function *
built-in automotive electronic standard test curve *
external analog control and monitoring (optional)
Supports SCPI protocol and built-in WebServer
with over voltage/over current/over power/over temperature/short circuit and other protection functions
standard USB communication interface, optional GPIB/LAN & RS232/RS485/CAN
* Only the professional edition power supply supports this function.
this series is equipped with full touch panel design and simple UI operation interface, which can easily complete parameter setting and professional programming functions, display large characters of output parameters, and make remote reading clearer and more intuitive, support front panel USB data loading and loading; Support front panel flip function, easy to operate and use.
Momentum S Series single-machine output voltage up to 1500V, current up to 630A. The wide-range output design expands the output range of current and voltage at full power output to meet a wider range of testing requirements without purchasing additional models. At the same time, high power density structure design is adopted, and 10kW output power is realized in 2U volume, which is 150% higher than that of SP-1U/2U series.
this series supports universal input voltage and can select single/three-phase AC input to meet more test application scenarios.
this series of power supplies provides three modes: List, Program, and Step to edit the output sequence, which allows customers to quickly select according to actual test requirements. After triggering the output, the power supply will automatically transform the output according to the edited file. This series of power supplies also supports sequential output of multiple files. You can set the number of repetitions of each file and the number of executions of the entire sequence file.
this series supports the Master-Slave parallel function. The parallel machine adopts high-speed optical fiber communication capability to achieve nearly zero transmission delay, and supports synchronization of all functions without performance degradation, fully solve the problems of slow speed and poor precision existing in the traditional parallel machine mode, and perfectly present the operation experience such as stand-alone testing. Provides multiple sizes to meet desktop usage and system integration.
this series of power supplies support CC & CV priority selection function to determine whether the output is voltage high speed mode or current non-overflow mode, so as to meet the test requirements of different types of loads. When testing the LED load, you can select CC priority mode to avoid overcharging of the output current. It is suitable for integrated circuit testing, charge and discharge testing, and power transient simulation of automotive electronics.
this series of power supplies support adjustable voltage, current climbing and falling slope.
the output voltage or current from zero to full range can be programmed by connecting an external voltage (0-5V/0-10V) or an external resistor (5-10K), and the simulation monitoring function (0V-5V/0-10V) can be used at the same time. To monitor the current output voltage and current.
<introduction to power functions of Professional Edition>
this series of power supplies have built-in interfaces for setting typical waveform such as sine wave, triangular wave, rectangular wave, trapezoidal wave, sawtooth wave and step, which is convenient for customers to edit and call. In addition to the above standard functions, you can also edit and output any complex functions that can be used for R & D and production tests.
this series of power supplies can simulate the I-V Curve function of solar panels, providing Curve Mode, user-defined Mode, and SAS Mode with built-in standard Curve. Using Curve Mode, you only need to set four parameters to describe the characteristic Curve similar to the solar array. In custom mode, you can edit I-V curves of up to 4096 points to achieve dynamic cloud blocking effect, which can be applied to the maximum power tracking (MPPT) performance test of solar inverter. Built-in SAS model allows you to simulate I-V curve output and generate reports after simply setting parameters.
this series of power supplies support the battery simulation function, which can truly simulate the real working status of various batteries. It can be matched with battery simulation software to change the output voltage in real time according to the change of external pull current and the simulated curve. The software provides real-time data monitoring and data report query functions, providing real experimental data for engineers to study battery power system.
this series of power supplies have built-in three-stage charging curves of common battery types on the market. Customers can directly call or modify the switching conditions for entering each charging stage according to the actual test data. And the hardware circuit of this series of power supply has been optimized, and the power supply is turned off after charging is completed. At this time, no matter how high the battery voltage is, the reverse current is as low as about 10mA, even if it is unprotectedThe battery backfilling device can also effectively prevent the power supply from withdrawing the battery current.
