Linear Standard DC Power Supply Apd1000l Series
parameters
• Input voltage range 1Ø 110V/220V 220V 3 Ø 220V 220/380V
• constant voltage temperature coefficient of 50-100ppm/℃ constant current temperature coefficient of 300ppm/℃
• CV (constant voltage) mode
line regulation≦0.05%Vmax+3mV load regulation≦0.05%Vmax+5mV
Ripple&Noise≦10mVrms(≦600V)/ 20mVrms(≦1000V)
• CC (constant current) mode
line regulation≦0.05%Imax+3mA load regulation≦0.05%Imax+5mA
Ripple&Noise≦6mArms(≦20A))/ 25mArms(≦30A)/30mArms(≦60A)
High Performance Design
• Modular structure, low failure rate and small design volume, industrial grade products, output capacity, high cost performance
• With voltage reverse protection, remote back-up as standard function
It has constant voltage and constant current mode, low ripple and low noise, fast response speed, lower than 100 & micro;s
• Voltage 10mV, current 1mA resolution
• Current Limit setting, with pre-view function, over-voltage setting (OVP), with pre-view function
humanized design
• The panel is simple, easy to operate, voltage on/off is a touch switch • The panel is simple, easy to operate, voltage on/off is a touch switch
• LED/LCD display parameters: voltage, current, power and time
• Digital keyboard setting voltage and current, current upper and lower limit setting function and alarm function
RS-232 or RS485 interface, a single test group can perform 35 test points (different voltage 0~800V, current 0 ~ 1000A, time 0.1S ~ 999.9H setting), and can continuously do cyclic tests (0~999999 times)
• Digital keyboard setting voltage and current, current upper and lower limit setting function and alarm function
Applicable place
Photovoltaic inverter test DC motor test DC product burn-in test analogy UPS converter input power LCD panel test electric vehicle/charging pile test, widely used in mechanical and electrical communication maintenance laboratory research institute school electronic product production line and system integration embedded automation and other industries
Selection specifications (APD1000L series)
| 0 to 30A | 0 to 50A | 0 ~ 100A | 0 ~ 200A | 0 ~ 400A | 0 ~ 600A | 0-1000A | |
|---|---|---|---|---|---|---|---|
| 0 to 20V | 1020-30AL | 1020-50AL | 1020-100AL | 1020-200AL | 1020-400AL | 1020-600AL | 1020-1000AL |
| 0 to 50V | 1050-30AL | 1050-50AL | 1050-100AL | 1050-200AL | 1050-400AL | 1050-600AL | 1050-1000AL |
| 0~100V | 1100-30AL | 1100-50AL | 1100-100AL | 1100-200AL | 1100-400AL | 1100-600AL | 1100-1000AL |
| 0~200V | 1200-30AL | 1200-50AL | 1200-100AL | 1200-200AL | 1200-400AL | 1200-600AL | 1200-1000AL |
| 0~300V | 1300-30AL | 1300-50AL | 1300-100AL | 1300-200AL | 1300-400AL | 1300-600AL | 1300-1000AL |
| 0~400V | 1400-30AL | 1400-50AL | 1400-100AL | 1400-200AL | 1400-400AL | 1400-600AL | 1400-1000AL |
| 0~500V | 1500-30AL | 1500-50AL | 1500-100AL | 1500-200AL | 1500-400AL | 1500-600AL | 1500-1000AL |
| 0~600V | 1600-30AL | 1600-50AL | 1600-100AL | 1600-200AL | 1600-400AL | 1600-600AL | 1600-1000AL |
Note: 1. Power calculation method: voltage A× current I = power W 2. customized minimum power of this power supply is 500W
Other specifications are welcome to customize
